3
14
×
1
15
×
1
16
×
1
Connect the side carriers (14) and (15) to the quick-release fasteners and
position (16) on mounting brackets (1), (2), (6) and (7) and the crossbar (9).
Secure the quick-release fasteners using the lock washers.
When all components are loosely in proper position, tighten the screws as
specified.
NOTE: Anti-theft protection is sold separately.
MOUNTING STEP ·
READ AND KEEP MOUNTING INSTRUCTIONS!
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
Errors and omissions excepted
Subject to technical and design changes.
6
