10278L
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
10
1. DESCRIPTION
The machine for assembling and disassembling shock
absorbers, model 10278L, is made up of a painted
metal tubular frame. On this structure is mounted a
pneumatic piston fixed at the frame, its extension and
compression allows the compression and the release
of the spring held by control brackets.
2. USAGE
The machine 10278L is a device for assembling and
dissasembling the shock absorbers of the cars. Every
different use is considered improper and illogical.
The manufacturer does not assume responsibility
for possible damage caused by noncompliance with
instructions.
3. TECHNICAL DATA
Air pressure
Max 8 bar
Cylinder stroke
330 mm
Packaging
dimensions
520x300x1600 mm
Machine
dimensions
650x400x1600 mm
Weight
74 Kg
4. INSTRUCTIONS AND WARNINGS
The usage of this machine model 10278L required a
particular attention.
Compressed springs can be potential dangers due to
force collected because of compression.
This machine must be used always with its specific
frontal protection mounted correctly on the frame.
4.1 Individual protection measures
Here under listed the individual protection measures
necessary to work with our product.
Accident prevention
gloves
Anti prevention shoes
Protection glasses
Instructions Manual
4.2 Danger pictograms
The machine is equipped with pictograms that show
remaining risks and individual protection measures to
be used during working operations.
The pictograms are integral part of the product. In
case of loss, deterioration or illegibility, require the
pictograms to the constructor in order to substitute
them immediately.
Replace the pictograms always in the same place
where they were removed following the above design.
5. CARRIAGE - HANDLING
The machine weights Kg. 74. It is necessary to use a
trolley for handling and carriage.
Fix the package at the trolley through straps in order
to balance it.
6. UNPACKING
The machine is supplied assembled and mounted on
a wooden pallet. Remove the cardboard box, the parts
of the packing and the pallet.
74
Kg
650x400x1600
