www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
BEDIEUNUNGSANLEITUNG
/ INSTRUCTION
MANUAL
40015L
Window-Cutting-Tool
Remove covers and panels inside the car if necessary. Cut a piece of square-wire according
to your demands and insert them by using the piercing tool through the urethane inside the
car. The lower dashboard-area is recommended in most of the cars. Fix the Window-
Cutting-Tool inside in the middle of the windshield which has to be change.
1.
Insert the square-wire from the
bottom of the female-adapter.
The phase is helpful to guide the
wire.
Fold the wire in a angle of 90° and
insert them through the upper
eyelet.
2.
Cut the wire at the level from the
eyelet.
