9
ENGLISH
SWAGTRON EB-12 24" Electric Bike
2.5 Assembling the Seat and Adjusting the Seat Height
For better pedaling, safety and overall riding comfort, positioning the seat at the right
height is important. The rider’s leg length is used to determine the seat’s position. During
pedaling, your hips should remain level and your legs shouldn't over-extend. To determine
the right seat height, sit on the eBike with one pedal at its lowest point and place the ball
of your foot on the pedal. If your knee bends slightly at this position, the seat is at the
right height. Additionally, when placing your heel on the pedal, your leg should be nearly
straight.
•
Loosen the screw on the seat post binder bolt.
•
Pull the seat up or push it down to adjust height. Check to make sure the seat post is fully
inserted into the frame and the head of the seat is parallel with the top tube.
•
Tighten the screw to secure the seat in place (Fig. 6).
Check the safety mark on post to make sure the seat stem is inserted enough.
2.6 Assembling the Pedals
Holding the crank arm vertical, use the included wrench to screw the pedal on the crank arm.
Repeat with the other pedal as needed (Fig. 7).
Fig. 7
Seat Post
Binder Bolt
Fig. 6
Safety Mark
