16
ENGLISH
SWAGTRON EB-12 24" Electric Bike
Section 6. Maintenance
•
Do not perform any kind of maintenance while the eBike is charging.
•
Attempting to repair or modify your eBike can void all warranties. Only authorized repair centers may service the eBike.
If you need assistance, please contact customer service.
6.1 Tire Inflation
You will need a pressure gauge and a standard bicycle pump to inflate the EB-12 eBike’s tires.
Step 1.
Ensure the eBike is powered off and stable, so it doesn’t move during inflation.
Step 2.
Visually inspect the tires for damage, scuff, or puncture marks. If the tire is damaged, DO NOT INFLATE IT. Contact
customer service immediately.
Step 3.
Find the valve located on the inside of the wheel and remove the cap.
Step 4.
Use a standard bicycle pump to pump air to the tires slowly.
Step 5.
Use the pressure gauge periodically to check PSI.
Step 6.
When the tire reaches 100 PSI / 7.0 BAR, stop inflating and replace the valve cap.
Step 7.
Repeat with other tire.
• Any PSI marking on the tires indicates a maximum. DO NOT inflate the front tire to this value, only inflate it to 100 PSI as
directed above.
• Underinflation is strongly recommended if you intend to ride outdoors in temperatures above 90°F degrees. Bring the
EB-12 eBike indoors and deflate the tires to 90 PSI. If the PSI is too high and the tire are exposed to excessively high
temperatures, riding outdoors may cause serious damage to the tire including but not limited to stretching and/or
rupturing.
