SWAGTRON SWAGGER 5 USER MANUAL 08
3.2 Attaching the Phone Mount
Mount and spacers may come already installed on the scooter.
This is an optional accessory that can be used with your scooter.
To Attach the Mount:
Step 1.
Place the spacers on the handlebars. Both may be needed to secure
the mount.
Step 2.
Open the bottom of the mount and position it over the spacers and
handlebars. Remember which side the metal nut is on.
Step 3.
After positioning the mount, add the plastic nut into the empty section
at the bottom of the mount. Turn the plastic nut to tighten the mount
and secure it.
Step 4.
Turn the tilt gear, adjust the tilt angle for the top of the mount as
desired, and turn the gear in the opposite direction to secure it.
Step 5.
Turn the expansion lock then turn the expansion gear to open the top
of the mount.
Step 6.
Position your phone inside the mount then turn the expansion gear in
the opposite direction so that the corners of the mount close over your
phone and hold it in place.
Step 7.
Next, turn the expansion lock to secure everything.
1. Expansion Gear
2. Expansion Lock
3. Tilt Gear
4. Plastic Nut
5. Spacers
6. Metal Nut
1
2
3
4
5
6
