14 SWAGTRON
®
SWAGBOARD HERO Hoverboard
English
sensors. The calibration process requires a flat stable surface and a level. Levels may be purchased separately at
most hardware stores or level apps may be downloaded with most smartphones.
STEP 1.
Turn off the hoverboard.
STEP 2.
Rotate both sides of the hoverboard so both pedals are level. Using a level tool is recommended
for accuracy.
STEP 3.
With the hoverboard level, press and hold the power button for about 6 seconds, until you hear a
single beep. The lights will begin flashing.
STEP 4.
Make sure the pedals are level, then press the power button again to turn the hoverboard off.
STEP 5.
Turn the hoverboard on and try riding to check calibration.
If the HERO is still not calibrated correctly, repeat step 1 to 6 or contact customer support for additional assistance.
