SWAGTRON SWAGGER 8 USER MANUAL 13
Section 5
USAGE
Read the following information before attempting to ride your Swagger 8.
An ASTM F1492-approved helmet as well as other protective gear must be worn at all times.
The Swagger 8 supports up to 150 lb. (68 kg). Do not carry passengers.
Only operate the Swagger 8 where permitted. Local laws may restrict where you may ride.
The Swagger 8 contains a motor and may be classified as a motor vehicle under local laws in your area. It is your
responsibility to abide by any local laws restricting how or where you may ride.
5.1 How to Ride
Always wear suitable protective gear when riding the Swagger 8. Place the scooter on a level surface. Make sure it is
completely charged before using. For your safety, please read this entire section before attempting to ride.
Step 1.
Carefully step on with one foot and stand upright but relaxed. Grab both handles.
Step 2.
Keep one foot on the ground and kick off to begin accelerating manually. Use the handles to steer.
Step 3.
Start your Swagger 8 by pressing and hold the power button for ~3s. Then start accelerating by pushing the
throttle.
Step 4.
To stop, release the throttle and use the handbrake, footbrake, or both to gradually coast to a stop. Then step
off the scooter one foot at a time. Be extra cautious when dismounting for the first time.
Step 5.
To turn the scooter off, remain at a complete stop for a few seconds and press and hold the power button for
3~5 seconds.
The display shows how much charge is left in the battery. Make sure the battery is at full power before heading out on
a long distance ride.
Summary of Contents for Swagger 8
Page 2: ......
