14
Manual (Non-Motorized)
Step 1.
Carefully step on the scooter deck with one foot. Stand upright but relaxed and grab both handles.
Step 2.
Keep one foot on the ground and kick off to begin accelerating manually. Use the handles to steer.
Step 3.
To stop, use the brake to gradually coast to a stop then step off the scooter one foot at a time. Be extra cautious when
dismounting for the first time. When using the brake, the taillight will turn red automatically.
Step 4.
If the scooter is on, press and hold the power button for ~3 seconds to turn off the scooter. The display and lights will
turn off as the scooter powers off.
Manual (Kick-Start Motor)
Using this Manual Kick-Start Motor feature can conserve battery power, improve battery life, and extend range-per-
charge.
Step 1.
Turn on the Manual Kick-Start Motor feature (see Section 2.5 Program Menu).
Step 2.
Carefully step on the scooter deck with one foot. Stand upright but relaxed and grab both handles.
Step 3.
Keep one foot on the deck and kick off to begin accelerating manually.
Step 4.
Once you reach approx. 1.8 mph, the throttle will activate. Press the throttle to accelerate to the desired speed.
Step 5.
To stop, release the throttle and use the brake to gradually coast to a complete stop. When using the brake, the
taillight will turn red automatically.
Dismount one foot at a time. Be extra cautious when dismounting for the first time.
This feature remains active until you manually turn it off in the Program Menu (see Section 2.5 Program Menu),
even if you power off the scooter.
Cruise Control
Step 1.
Turn on Cruise Control (see Section 2.5 Program Menu).
Summary of Contents for Swagger 8
Page 2: ......
