SWAGTRON SWAGGER CALI DRIFT USER MANUAL 11
Section 5
USAGE
Read the following information before attempting to ride your Cali Drift.
An ASTM F1492-approved helmet as well as other protective gear must be worn at all times.
The Cali Drift supports up to 264.5 lbs / 120 kg
Only operate the Cali Drift where permitted. Local laws may restrict where you may ride.
The Cali Drift contains a motor and may be classified as a motor vehicle under local laws in your area. It is your
responsibility to abide by any local laws restricting how or where you may ride.
5.1 How to Ride
Assuming you have equipped suitable protective gear and that the Cali Drift has been placed on a level surface and is well
charged follow the steps below.
For your safety, please carefully read this entire section before attempting to ride.
Step 1.
Carefully step on with one foot and stand upright but relaxed. Grab the Handle.
Step 2.
Keep one foot on the ground and kick off to begin accelerating manually. Use the Handle to steer.
Step 3.
Once the Cali Drift reaches at least 3 km/h (1-2 mph), press the throttle to start powered acceleration if desired.
Step 4.
To stop, release the throttle and use the Handbrake, Footbrake, or both to gradually coast to a stop then step off
the scooter one foot at a time. Be extra cautious when dismounting for the first time.
Step 5.
To turn the scooter off, remain at a complete stop for a few seconds and use the Power Switch.
