(8)
7. SPECIFICATIONS
Type XLR, electronically balanced
Mic E.I.N. (20 Hz - 20 kHz)
@ 0
source resistance -122 dB / -125 dB A-weighted
@ 0
source resistance -122 dB / -125 dB A-weighted
@ 50
source resistance -122 dB / -125 dB A-weighted
@ 150
source resistance -121 dB / -124 dB A-weighted
Frequency response < 10 Hz - 50 kHz (-1 dB)
Gain +33 dB, +8 dB with pad
Max. Input level +12 dBu @ 10 dB gain
Impedance approx. 2.2 k
balanced,
1.1 k
unbalanced
Signal-to-noise ratio 110 dB / 114 dB A-weighted
(-11 dBu in @ +33 dB gain)
DISTORTION (THD+N) 0.1%/ A-weighted
Ω
Ω
Ω
Ω
Ω
Ω
MICROPHONE INPUTS
MONO LINE INPUTS
EQ
MAIN MIX SYSTEM DATA
Type 1/4
TRS connector, balanced
Impedance approx. 80 k
balanced,
40 k
unbalanced
Max. Input level -30 dBu
″
Ω
Ω
Low 80 Hz /
15 dB
High 10 kHz /
15 dB
±
±
Noise
Main mix @ -
Channel fader -
-106 dB / -110 dB A-weighted
Main mix @ -
Channel fader -
-87 dB / -90 dB A-weighted
Main mix @ -
Channel fader -
-80 dB / -82 dB A-weighted
∞
∞
∞
∞
∞
∞
LOUDSPEAKER OUTPUTS
DSP
DSPLAY
Type 2-digit, 7-segment LED
Type Neutrik Speakon-compatible,
1/4
TS connectors
Load impedance 4-16
″
Ω
Converter 24-bit Sigma-Delta,
Sampling rate 44 kHz
(1) Read these instructions.
(2) Keep these instructions.
(4) Follow all instructions.
(5) Do not use this device near water.
(6) Clean only with a dry cloth.
(7) Do not block any ventilation openings. Install in accordance with the manufacturer s instructions.
(8) Do not install near any heat sources such as radiators, heat registers, stoves, or other app-
aratus (including amplifiers) that produce heat.
(9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the ob-
solete outlet.
(3) Heed all warnings.
1. IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
To reduce the risk of electric shock, do not remove the top cover (or the rear section).
No user serviceable parts inside; refer servicing to qualified personnel.
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain and
moisture.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous
voltage inside the enclosure-voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance
instructions in the accompanying literature. Please read the manual.
2. DETAILED SAFETY INSTRUCTIONS:
(1)
