background image

(7)

Please be sure to only use commercial Speakon cables (type NL4FC) for connecting your

loudspeakers to the mixer. Please check the pin connections of your loudspeakers and cables
depending on the EUROPOWER speaker output you choose.

OUTPUT

1+

1+

POS

POS

NEG

NEG

 Bridge -

1-

2+

2+

2-

MAIN MONO

6. APPLICATIONS

This illustration shows just one example of how the channels of your power mixer can be u-
sed, including the connection of mono and stereo sources, and the tape ins and outs recor-
ding the mix signal of playing back external signals.

(2)

(10) Protect the power cord from being walked on or pinched particularly at plugs, extension

cords, and the point at which they exit the unit.

(11) Only use attachments/accessories specified by the manufacturer.

(13) Unplug this device during lightning storms or when not used for long periods of time.

(14) Refer all servicing to qualified service personnel. Servicing is required when the unit has

been damaged in any way, such as power supply cord or plug is damaged, liquid has b-
een spilled or objects have fallen into the device, the unit has been exposed to rain or
moisture, does not operate normally, or has been dropped.

(12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the device. When a cart is used, use caution when moving the cart/ device
combination to avoid injury from stumbling over it.

Summary of Contents for KF-PM52D







Reviews: