12
Camera:
Select a camera that you would like to edit.
Enable Motion Detection:
Click the checkbox to enable.
Handling:
Here you can define what will happen when the camera you’ve
selected has detected an Event -
Trigger Channel:
Select additional cameras to start recording.
Arming Schedule:
Adjust your arming schedule by selecting a start day
and a time period (24-hour time). Use the “Copy” function to apply all
settings to the other cameras. Don’t forget to click “Apply” to save set-
tings. Click “OK” to exit.
Handling:
Options available are Full Screen Monitoring, Audible Warn-
ing (enabling the DVR’s internal buzzer), Alert CMS software (send alerts
to the SwannView Plus Windows software) and to send an email. Don’t
forget to click “Apply” to save settings. Click “OK” to exit.
Sensitivity:
The sensitivity setting is controlled by a slider, allowing you
to set a value between L (low) and H (high). The closer to H the slider is
set, the more sensitive the DVR will be when detecting motion.
The entire view of the camera is enabled to detect motion, however you
can select certain areas if you wish. Using the mouse, click the “Clear”
button then click and drag to select the area that you want to enable for
motion. To enable the entire view of the camera for motion, click the
“Full Screen” button.
• Use the “Copy” function to apply all settings to the other cameras.
• Don’t forget to click “Apply” to save settings.
• Click the “Back” button to go back to the Menu.
Camera: Motion
Whether you’re waiting
for an expected Event,
hoping you don’t spot
an unwelcome visitor,
or just curious about
what happens when
you’re not around,
Motion Detection has
been configured to
alert you and record
video when the DVR
detects motion.
Camera 1
26-05-2015 Tue 09:30:15
