12
Camera: Motion
By default, the entire view of the camera has been enabled to detect mo-
tion, however you can select certain areas within the image if you wish.
Camera:
Select a camera that you would like to edit.
Enable Motion Detection:
This is enabled by default. You can click the
checkbox to disable.
Settings:
Here you can define what will happen when the camera you’ve
selected has detected movement.
Trigger Channel:
Select additional cameras to start recording.
Arming Schedule:
Adjust your arming schedule by selecting a start day
and a time period (24-hour time). Click the “Copy” button to apply all
settings to the other cameras. Don’t forget to click “Apply” to save set-
tings. Click “OK” to exit.
Linkage Action:
Options available are full screen monitoring, enabling
your DVR’s internal buzzer, send alerts to the SwannView Plus Windows
software (software must be running to receive alerts) and to send an
email. Don’t forget to click “Apply” to save settings. Click “OK” to exit.
Sensitivity:
This setting is controlled by a slider, allowing you to set a
value between L (low) and H (high). The closer to H the slider is set, the
more sensitive the detection will be.
Using the mouse, click the “Clear” button then click & drag to se-
lect the area that you want to enable. To enable the entire view of
the camera, click the “Full Screen” button.
·
Don’t forget to click “Ap-
ply” to save settings.
·
Use the “Copy” function to
apply all settings to the other
cameras.
·
Click the “Back” button to
go back to the Menu.
Whether you’re waiting
for an expected event,
hoping you don’t spot
an unwelcome visitor,
or just curious about
what happens when
you’re not around, your
DVR has been config-
ured to record video
and to alert you when
motion is detected.
26-02-2016 Fri 09:30:15
Camera 01
