17
Camera: Video Quality Diagnostics
Camera:
Select a camera that you would like to edit.
Enable Video Quality Diagnostics:
Click the checkbox to enable.
Handling:
Click this to instruct your DVR on how to alert you when there
is an error or notification and to set an arming schedule.
Arming Schedule:
Adjust your arming schedule by selecting a start day
and a time period (24-hour time). Click the “Copy” button to apply all
settings to the other cameras. Don’t forget to click “Apply” to save set-
tings. Click “OK” to exit.
Linkage Action:
Options available are full screen monitoring, enabling
your DVR’s internal buzzer, send alerts to the SwannView Plus Windows
software (software must be running to receive alerts) and to send an
email. Don’t forget to click “Apply” to save settings. Click “OK” to exit.
Blurred Image:
Your DVR will alert you if the overall image is blurred.
This can happen if an object is too close to the camera or if someone is
intentionally obscuring the image.
Abnormal Brightness:
Your DVR will alert you if the camera detects a
bright source of light such as a torch or headlights.
Color Cast:
Your DVR will alert you if the camera detects an unwanted
tint in the image which is caused by a change to the lighting, white bal-
ance and if one or more color channels is strong or weak.
Use the slider to increase or decrease the threshold. The higher the
number, the more sensitive the setting will be. You can also press the up
and down arrow buttons to change sequentially.
·
Don’t forget to click “Ap-
ply” to save settings.
·
Use the “Copy” function to
apply all settings to the other
cameras.
·
Click the “Restore” button
to revert back to default set-
tings.
·
Click the “Back” button to
go back to the Menu.
Video Quality Diag-
nostics enables your
DVR to alert you if the
camera has a blurred
image, if there is ab-
normal brightness in
the image or if there is
an unwanted tint in the
image due to the light-
ing and white balance
of the camera (known
as Color Cast).
Camera 01
26-02-2016 Fri 09:30:15
