49
Configuration: Live View - General
Video Output Interface:
This option cannot be changed.
Live View Mode:
This function allows you to change how the cameras
are displayed on-screen in Live View mode. Selecting 2 x 2 will display
four cameras on-screen, selecting 3 x 3 will display eight cameras on-
screen and so on. Selecting 1 x 1 will display the first video channel full-
screen. The number of views available is dependent on how many video
channels your DVR has.
Dwell Time:
The time in seconds to dwell on a video channel when en-
abling “Start Auto-switch” on the Menu Bar. This only works when Live
View mode is set to “Single Screen”.
Enable Audio Output:
Click the checkbox to enable the audio output
connection on your DVR.
Volume:
Click to change the volume level.
Event Output:
All events will display on your DVR’s VGA or HDMI output.
Full Screen Monitoring Dwell Time:
The time in seconds to display a
full screen image when an event has occurred.
·
Don’t forget to click “Ap-
ply” to save settings.
·
Click the “Back” button to
go back to the Menu.