2. Drill fixture hole(s), using the 1/4” pilot hole for a guide, with
a 1-3/8” hole saw.
3. Faucet may be installed at this time per manufacturer’s
instructions.
Vanity Top Installation — Cabinet Mount
1. Install cabinet per manufacturer’s instructions.
Note:
Make sure cabinet is level before installing vanity top.
2. Clean underside of vanity sink with denatured alcohol.
Remove all dust and allow the surface dry completely.
Solvents Hazard
Follow all manufacturers’ safety
instructions for silicone sealants
and denatured alcohol. Alcohol vapors are both flammable
and hazardous to breathe. Silicone vapors may irritate eyes
and nose. Personal injury can result from improperly handling
or use of products, such as denatured alcohol. Always follow
the manufacturer’s recommendations for the safe use of these
products. Ventilate any work area before beginning to apply
silicone sealants, cleaning agents, or solvents.
3. Apply a bead of adhesive or silicone onto each corner of
cabinet top.
800-325-7008 7
Swan
Installation Procedure
VI-008
VI-009
VI-005
VI-007
Denatured
Alcohol
WARNING
VI-004
Summary of Contents for Chesapeake CH1B-2225
Page 16: ...Swan 16 800 325 7008 ...
Page 17: ...800 325 7008 17 Swan ...