1. Take out the Handle, Main Body, Li-ion Battery Pack, Clean Water Tank,
Dirty Water Tank Set, Roller Brush, Charging Station, Drying Tray and Cleaning
Tool from the package.
2. Insert the handle into main body of cleaner until you hear a click.
(Fig. 1)
3. Turn over the clean water tank, insert it into the main body along with the
clean water tank slot until you hear a click.
(Fig. 2)
4. Press the release button of Li-ion battery pack, then put the battery pack
into the battery slot, and push it up slightly until you hear a click.
(Fig. 3)
5. Align the bottom of dirty water tank with the inlet, then push it inwards until
you hear a click.
(Fig. 4)
6. Insert the roller brush into the base of the brush, rotate the roller brush
so that the brush can align with the brush, meanwhile, make sure that
the lock can align with the lock hole, then lock the roller brush.
(Fig. 4, 5, 6)
Fig. 1
Fig. 5
Fig. 2
Fig. 6
Fig. 3
Fig. 7
Fig. 4
Summary of Contents for DIRT MASTER CROSS OVER
Page 2: ......
