1) 0 ~ 9 (Numeric Buttons):
Used
to input numbers. 1 ~ 4 can be used
as quick channel changing buttons
in a similar manner to a television,
and these will work during either live-
viewing mode or playback. Additionally,
the numeric buttons will be used when
inputting any numerical information –
most often, your password.
2) ALL:
Activates or deactivates the
entire area shown on screen to be
armed for Motion Detection recording
mode. Motion Detection will need to
be correctly confi gured for this button
to function as described.
3, 7, 8, 9 & 10) Arrow Buttons:
Moves
the cursor in the appropriate direction
when navigating menus.
5) Record:
Press to immediately start
recording. This acts as a manual override
to the schedule and motion recording
modes. For a channel to be recorded in
this mode (or any other) it must listed as
‘active’ in the Camera Setup and Record
Setup menus.
6) Menu:
One of the primary controls
for navigating through the menus.
When in live-viewing mode, it will enter
the main menu. When pressed in the
main menu, it will return the DVR to
live-viewing mode. Finally, when in a
submenu, this button will return you to
the main menu.
7) SEL (Select):
The equivalent of Enter/
Return on a computer keyboard. Use
this button to (as the name suggests)
select an option in the menus, or to
confi rm an entry.
11) Mute:
Will not affect the function
of this DVR.
12) Play:
If pressed in live-viewing
mode, this will take you directly into
playback mode, and begin playing the
most recent recording. In playback
mode, use it to resume playback after
pausing or stopping a recording.
4) Rewind:
During playback, this will
reverse the footage. Press multiple times
to increase the speed of the reversing.
13) Fast-Forward:
During playback,
this will increase the speed of playback.
Press multiple times to increase the
speed of playback further.
14) Stop:
In playback mode, pressing
this button will stop playback.
15) Pause:
During playback, will pause
the current recording and leave a still-
frame on screen. In live-viewing mode,
this will activate the auto-sequence
mode, where the display automatically
cycles through the available camera
signals (this must be correctly confi gured
and enabled to function correctly).
Layout of Remote Control
1
2
3
4
5
6
8
10
12
14
7
9
11
13
15
10
NetViewer - The Main Interface
59
2
1
3
4
5
6
7
9
8
10
11
12
13
27
Channel Name
1.
Date & Time
2.
Live - Click to view live view screen.
3.
Replay - Click to view the replay screen.
4.
Setup - Click to view the setup screen.
5.
Logout - Click to logout.
6.
Minimise - Press to minimise screen
7.
Close - Press to close D9-Viewer.
8.
PTZ Control - Pan, Tilt, Zoom
9.
controls.
Open Window, Capture & Record
10.
Single, Quad View Buttons
11.
Click to change between single and
12.
quad viewing mode
Volume Bar - LEFT click and drag
13.
mouse from left to right to increase
the DVR volume.
Mute - Click to mute sound.
14.
Click to view single camera view.
Click to to view quad view.
Click to OPEN and CLOSE live view .
Click to capture image.
Click to start recording.
