10
AFTER USE
When you have finished ironing:
•
Unplug the product from the mains supply and allow to fully cool.
•
If you are using tap water then remove the tank and empty the water out, then
refit the tank.
•
If using bottled, filtered or distilled water you can leave the water in the tank for a
few days until your next ironing session
•
The outside of the iron can be cleaned with a soft cloth moistened with a mild
detergent solution
•
Do not use chemical or abrasive cleaners on any part of the iron
•
Never immerse the base or hand unit in water
•
Never run the base or hand unit under the tap
DE-SCALING
We highly recommend using bottled water as it is inexpensive and it could be a
long time before you need to de-scale the product. In certain areas of the UK, the
iron can become scaled up after only a few weeks! Call 0871 200 0003 for more
info.
Your warranty does not cover damage to the iron caused by excessive lime scale
build up!
SPARE PARTS
The following spare parts are available for this product and can be purchased from
our web site: www.swan-brand.co.uk
SI14310N01: Lime scale filter
SI14313N02: Tank
SI14310N_IM.indd 10
29/01/2018 09:17
