9
TANK LEVEL
The tank should hold enough water to fuel even the longest ironing session but keep
your eye on it. It’s always best to refill the tank before it becomes completely empty. If
the pump noise increases, it is a sure sign that the tank is empty!
After refilling the tank, you may need to prime the pump again. Hold the hand unit
below the base and press/hold the steam release button. It should only take a few
seconds to prime the pump - and you’re ready to go again!
If you need to refill the tank more than twice during a single ironing session, then
some pondering on the life choices you have made that have lead to the existential
horror of having such a back log of ironing to do might be in order (our service line
cannot help with this).
VERTICAL STEAM IRONING
•
Follow the steam ironing process, and then hold
the iron in vertical position about 5cm to 15cm
away from the hanging fabrics. Press the steam
release button, which will create vertical steam.
•
This feature is especially used for removing
creases from hanging clothes and curtains.
•
Never direct steam toward people or animals
•
The room should be ventilated.
•
Note: Never block the steam hose.
Fig.8
HOW TO USE
AUTO SHUT-OFF FEATURE
In order to save energy, the iron will automatically switch off if it isn’t moved or no
buttons are pressed for 10 minutes. To reactivate the iron, simply move it or by
pressing the function button or the steam trigger. A “beep” sound will be heard and
the control panel will return to its previous temperature setting and start heating
up. It may take about 60 seconds for the iron to be ready for use.
Note: The appliance is not switched off completely when it is in auto shut off mode.
Press and hold the function button to turn the appliance off, then unplug from the
mains supply outlet.
SI14310N_IM.indd 9
29/01/2018 09:17
