5
4
HOW TO USE
CLEANING & MAINTENANCE
Before first use
Unpack the toaster and remove all packaging materials etc
Place the toaster on a suitable, level surface. Set the browning dial to 3 or 4.
Place one or two slices of bread into the toaster slots
Connect the product to the mains supply and press down the carriage lever. NOTE:
The carriage lever will only stay down if the product is connected to the mains supply.
You can press the cancel button at any time to cancel the toasting process. The toast
will pop up when it is ready
THINGS TO NOTE:
On first use, you may notice a slight odour. This is caused by the evaporation of light
oils used in manufacture. This only occurs on the first use and does not affect the
taste of your toast.
OTHER FUNCTIONS:
The Defrost bread setting is perfect for defrosting and toasting frozen bread. To use
this function, press the carriage lever down then press the Frozen Bread button.
The Reheat setting is good for reheating toast that may have gone cold. Press the
carriage lever down then press the Reheat button
This product requires very little maintenance.
The toaster is equipped with a crumb tray which slides out from the bottom of the
toaster.
This should be removed and the crumbs discarded after each use.
Excessive build up of crumbs can cause an unpleasant odour and in extreme cases
pose a fire hazard.
For cleaning external surfaces, a soft cloth moistened with a mild detergent solution
is all that is required.
DO NOT USE ABRASIVE OR STRONG CHEMICAL CLEANERS
DO NOT IMMERSE ANY PART OF THE PRODUCT IN WATER
ALWAYS ENSURE THE PRODUCT IS UNPLUGGED FROM THE MAINS SUPPLY AND
COMPLETELY COOL BEFORE CLEANING.
ST17020N_IM.indd 4-5
03/03/2015 14:52
