20
sWaP Dual SIM
user guide
www.s-w-a-p.co.uk
Contents
Bluetooth
This section contains all tools required to locate, pair
and manage Bluetooth devices for use with your sWaP
Dual SIM.
Note: This Bluetooth section is also accessible from
within the Settings menu.
To access the Bluetooth section
1 From the standby screen, press the
Menu
softkey.
2 Choose the
(BT)
icon.
The menu options will be shown:
•
Power
determines whether the Bluetooth circuitry is
switched on.
•
Visibility
determines whether your sWaP Dual SIM can
be seen by other Bluetooth devices that are not yet
paired with it. When set to
Off
, your sWaP Dual SIM
will not be discoverable.
•
My Device
lists all currently paired devices and also
allows you to search for new Bluetooth devices.
•
Search audio device
initiates a search for Bluetooth
audio devices in the vicinity that are capable of being
used in conjunction with your sWaP Dual SIM.
•
My name
allows you to edit the name that your sWaP
Dual SIM uses as its identity during Bluetooth sessions.
•
Advanced
Audio Path
allows you to transfer all audio through
the microphone and speaker of a suitable Bluetooth
device.
Storage
allows you to choose which memory area to
use during Bluetooth sessions.
My address
displays the fixed MAC (Media Access
Control) network address of your sWaP Dual SIM.
Pairing with another device
In order to work together, Bluetooth devices must
be paired to produce a trusted bond between them.
During the pairing process, one device must search
while the other is made to be ‘visible’ and wait to be
discovered.
To search for and pair with other devices
1 From the main Bluetooth menu, choose
Search audio
device
. If the Bluetooth circuitry was previously Off, it
will be switched On and a search for other devices will
be carried out for up to one minute. Ensure that the
other devices have been set to be visible.
Any found Bluetooth devices will be listed in the
My
device
page.
2 Choose the name of the device to bond with, enter a
valid passcode and then press
OK
. For most devices,
there is no fixed passcode number and a common four
digit number must be decided on between the users.
Press
Yes
to confirm pairing.
Note: Many standard passcodes are ‘0000’.
To make your sWaP Dual SIM discoverable
1 From the main Bluetooth menu, ensure that the
Visibility
option is set to
On
.
2 When your sWaP Dual SIM is discovered, the other
device will initiate pairing and you will be asked to
enter a four digit passcode that matches the one
entered into the other device. Enter the code and
confirm the pairing.
Your sWaP Dual SIM and the other device will now
share a common bond and can reconnect and transfer
information at any time.
To break the pairing bond
When you no longer want to use the devices together,
you can break the bond.
1 Choose
My device
and highlight the name of the
other device.
2 Choose
Delete
and then choose
Yes
to remove the
pairing bond.
