3
sWaP Dual SIM
user guide
www.s-w-a-p.co.uk
Contents
Getting started
Inserting your SIM card(s)
Note: Avoid touching the gold contacts of your SIM
card.
1 At the rear of your Dual SIM phone, carefully slide the
rear cover away from the camera lens until it releases.
2 Lift up the base of the battery (adjacent to the large
loudspeaker) and remove it.
3 Slide your first SIM card (with the contacts facing
downwards and the notched corner towards the top of
the phone) into the socket labelled SIM1. If you are using
a second SIM card, place it into socket labelled SIM2 in a
similar manner.
5 Place the rear cover onto the rear of the phone so that
it is about 4mm (1/8”) away from its closed position and
then slide it in the direction of the camera lens until it
clicks into place.
4 Replace the battery: Align the three gold contacts on
the battery with the three spring contacts in the phone
recess, adjacent to the camera lens. Place the contact
end of the battery into the recess and then push the
other end into place.
3.7V
SIM
1
SIM
2
3.7V
D
U
A
L
S
I
M
3.7V
