GB
6
differential switch upstream.
Check on the functioning of the machine.
22. Never open the switch box on the motor. Should this be necessary, contact a qualified
electrician.
23. Make sure that the machine and the cable never come in contact with water.
24. Treat the power cable with care, do not attempt to move the machine by pulling the cable, do
not yank the cable to unplug it; keep the cable away from excessive heat, oil and sharp
objects.
25.
Never leave the machine unattended with the power supply “on”, also disconnect the power
cable when not in use, when carrying out maintenance work, when changing attachment or
moving the machine.
26. Before starting work, hydraulic pipes and hoses shall be inspected and the stopping devices
shall be tested.
27. Stop the machine before cleaning or making adjustments.
28. The hazards may arise from particular characteristics of wood when being split (e.g. knots,
logs of irregular shape etc.)
29. Not reaching into the splitting zone
SPECIAL WARNINGS
Special types of danger can arise during the use of this powerful machine. Take particular care to
protect both yourself and all other persons in the vicinity.
Mechanical hazards
Wood splitting is associated with particular mechanical hazards. Never use this machine if you are
not wearing proper safety gloves, shoes with steel caps and certified eye protection. Be cautious
of splinters generated while working; avoid stab-like injuries and the possibility of the machine
seizing up.
Never attempt to split any trunks which are either too long or too small and do not fit in the
machine properly.
Never attempt to split any trunks which contain nails, wire or any other objects. Clear up while you
work; collections of split wood and wood chips can make your work area dangerous. Never
continue working if your work area is full to the extent that you could slip, trip or fall over.
Keep onlookers well away from the machine and never permit unauthorized persons to operate
the machine.
Hydraulic system
Never use the machine if there is ever any danger from hydraulic fluid. Check for leaks in the
hydraulic system every time before you start using the machine.
Check that the machine and your work area are clean and free of any patches of oil:
Hydraulic fluid may be the cause of danger because it can cause you to slip and fall, may make
your hands slip while operating the machine or may cause a fire.
