10
Regenerative Cartridges - User manual
Warranty Information
A warranty repair will be made, if:
The warranty cannot be applied, if:
Swardman provides a warranty against manufacturing and material defects in the product. In case of a manufacturing
or a material defect during the warranty period, we undertake to repair (or replace) the product.
For this product intended for domestic use, the warranty period is 24 months from the date of purchase. In the event
of industrial or professional use or with similar load is the warranty period 12 months
The following components are considered to be wearing parts with limited lifetime. Their lifetime depends on regular
servicing, and these parts are: Blades, pulleys, bearings, brushes, springs.
The warranty does not cover the costs associated with routine maintenance of the product.
It is in your best interest to follow the user’s manual of the machine. Thorough care will ensure that the product will
serve you well for many years.
If necessary, always use the Swardman original spare parts. The warranty does not cover a damage resulting from
using spare parts not manufactured or approved by Swardman.
This warranty does not affect your statutory rights related to the defective products.
When the time comes to dispose of the product, please consider the environment and recycle the product. (For
information on where to properly dispose of the product, please contact your local authorities).
• you take the machine to your Swardman gardening equipment dealer,
• you prove the product purchase and the purchase date, e.g. through the product invoice.
• you fail to prove the product purchase with the purchase date,
• the equipment was not labelled with a production label,
• the product is modified resulting in a change in the manufacturer’s specifications or the use of non-original parts,
• any previous repair of the product is performed elsewhere than in the authorised Swardman service department,
• a defect is caused by an incorrect adjustment, misuse, improper use, professional use, negligence or by accidental
damage,
• a defect is caused by insufficient lubrication or maintenance,
• any part was damaged by impact on a solid object,
• a defect is caused by the product‘s misuse,
• a defect is caused by the product‘s normal wear and tear.
