6
Regenerative Cartridges - User manual
Rotary brush
It is used for the application of the sand and substrate, which usually follows
the aeration of the lawn. The sand can also be incorporated into a lawn that has
not been aerated, although the resulting effect is poorer than on a previously
aerated lawn.
The sand application is sufficient at the moment when in the whole grass area
the grass stalks are visible and the sand does not form accumulated hills. An
uneven terrain can be levelled by repeating the sand application.
In this case, larger sand layers are desirable. Such places are recommended to crop with the grass seed. When the
sand is properly applied, the lawn usually regenerates within 2 weeks.
For the aeration and best results, we recommend using dry and loose silica sand with a fraction of 0 - 2 mm (0 - 0.08
in). Moist or wet sand is not suitable for rotary brush application.
Technical Data
Note: The permissible working depth of the verticutting cartridge mentioned above is indicative. The actual working
depth decreases with increasing the soil hardness and in case of solid particles such as stones which can also damage
the verticutter blades.
Technical Data
Verticutter cartridge
Scarifier cartridge
Rotary brush
Model
45 cm
18in
55 cm
22in
45 cm
18in
55 cm
22in
45 cm
18in
55 cm
22in
Range width
450 mm
18in
550 mm
22in
450 mm
18in
550 mm
22in
450 mm
18in
550 mm
22in
Number of blades / springs
10
12
36
44
-
-
Maximum designed depth
- 10 mm
-0.4in
- 10 mm
-0.4in
0 mm
0in
0 mm
0in
0 mm
0in
0 mm
0in
Maximum permissible working depth
- 5 mm
-0.2in
- 5 mm
-0.2in
0 mm
0in
0 mm
0in
0 mm
0in
0 mm
0in
