background image

17

16

   User Manual

   User Manual

Warranty Information

Swardman provides a warranty against manufacturing and material defects in the product. In case of a manufacturing 
or a material defect during the warranty period, we undertake to repair (or replace) the product.

The engine, which is part of the mower, is covered by its manufacturer’s warranty conditions. 
     
For this product intended for domestic use, the warranty period is 24 months from the date of purchase. In the event 
of industrial or professional use of the machine or any use of a similar load, the warranty period shall be 6 months.

The following parts are considered to be consumables. Their lifetime depends on regular servicing, and the warranty 
does not normally apply to them: blades, driving belts, bearings, bovden cables.

The warranty does not cover the costs associated with routine maintenance of the product.

It is in your best interest to follow the User Manual of the lawn mower. Thorough care will ensure that the product 
will serve you well for many years. To ensure proper functioning, it is recommended to have the reel sharpened at the 
authorised Swardman service department at least once a year.

If necessary, always use the Swardman original spare parts. The warranty does not cover a damage resulting from 
using spare parts not manufactured or approved by Swardman.

This warranty does not affect your statutory rights in connection with defective products.

When the time comes to dispose of the product, please consider the environment and recycle the product. (For 
information on where to properly dispose of the product, please contact your local authorities).

A warranty repair will be made, if:

The warranty cannot be applied, if:

•  you take the machine to your Swardman gardening equipment dealer,

•  you prove the product purchase and the purchase date, e.g. through the product invoice.

•  you fail to prove the product purchase with the purchase date,

•  the machine is not provided with the serial number plate,

•  the product is modified resulting in a change in the manufacturer’s specifications or the use of non-original parts,

•  any previous repair of the product is performed elsewhere than in the authorised Swardman service department,

•  a defect is caused by an incorrect adjustment, misuse, improper use, professional use, negligence or by accidental 

damage,

•  a defect is caused by insufficient lubrication or maintenance,

•  any part, especially the drive or mowing mechanism, is damaged by its impacting against a solid object,

•  a defect is caused by the product‘s misuse,

•  a defect is caused by the product‘s normal wear and tear.

Troubleshooting

The  following  table  shows  possible  symptoms  of  problems  and  how  to  fix  them  if  your  machine  is  not  working 
properly. If you cannot find or fix the problem while using this table, please contact your dealer.

Caution: Before checking for any defects, stop the machine and disconnect the spark-
plug connector. For support in the form of video instructions, visit 
www.swardman.com and section „support“

If the above troubleshooting procedures fail to solve problems, contact Swardman 
at www.swardman.com in „contact“ section.

Problem

Possible cause

Removal

The ground is untreated 
after mowing

The bed-knife is not adjusted 
correctly.

Adjust the bed-knife.

Engine does not start

1. Engine flooded
2. Spark-plug cable disconnected
3. Spark plug dirty

1. Allow engine to rest for 10-15 minutes
2. Reconnect cable
3. See Engine Operation Manual

Engine has stopped

1. Lack of petrol
2. Engine speed too low under given 

conditions

3. Reel blocked

1. Fill the fuel tank with petrol
2. Open the throttle
3. Stop engine and remove an obstacle

Engine cannot be 
stopped

Malfunction of the ignition switch

Disconnect the cable connector from 
the spark plug to stop the engine
Contact your Swardman dealer.

Reel does not rotate

1. Incorrect adjustment of the reel
2. The reel cable is too loosened
3. Worn belt 

1. Loosen adjusting screws of the reel 

34

 

and readjust the reel

2. Tighten the cable by loosening the 

counternut 

27

, screwing out the screw 

28

 and tightening the counternut 

27

.

3. Replace the reel belt 

31

Reel rotates even when 
the reel control lever is 
not pushed

Incorrect adjustment of the reel
cable

Loosen the cable by loosening the 
counternut 

27

, screwing in the screw 

28

 

and tightening the counternut 

27

.

Drive does not start

1. Incorrect adjustment of the drive clutch
2. Damaged drawbar or cable guide
3. Worn belt

1.  Tighten the drive clutch cable by 

loosening the counternut 

29

, screwing 

out the screw 

30

 and tightening the 

counternut 

29

.

2.  Replace the bowden and cable
3.  Replace the drive belt 

32

When the machine is 
pushed forward with the 
engine not running, the 
rear roller jams

Uneven tension of the transmission belt

In this case, try pulling the machine 
or when the machine is to be pushed 
forward for longer distances, start the 
engine.

Summary of Contents for EDWIN 45














Reviews: