●
The Asset Tracker ships preconfigured for 1 of 3 different asset
tracking profiles.
●
The configuration of the Swarm Asset Tracker is 1 GPS
acquisition every 2 hours with 1 transmission per 2 hour window.
Motion detection is also enabled by default.
Visual Representation of the Swarm Asset Tracker’s Configuration
SOMETHING BROKEN OR MISSING?
CONTACT SWARM CUSTOMER SUPPORT:
SUPPORT
@
SWARM.SPACE
Data Transmission - Motion Detection Disabled
© 2022 SWARM TECHNOLOGIES
SWARM
ASSET TRACKER
QUICKSTART GUIDE
PAGE
1
6
●
In the first GPS state, the Asset Tracker will attempt to acquire a GPS
fix for up to 4 minutes. The acquired data will be queued for
transmission.
●
Once a GPS fix is acquired, the Asset Tracker will transition to its
receiver state (Rx) for up to 40 minutes where it will listen for
satellite beacons to trigger a transmission (Tx).
●
The Asset Tracker will then transition to its sleep mode as soon as
the queued message is transmitted, or if 40 minutes have passed. It
will remain in its sleep mode until 2 hours have passed since its initial
power-on time and it will then repeat the same sequence.