There are multiple options available to mount the Asset Tracker:
The included mounting feet can be attached to the enclosure using either a
heavy duty mount installation method, or using a flush mount installation
method.
The 2 different installation options for the mounting feet are shown on
Using the magnet mounts requires the use of the mounting feet installed using
the heavy duty method.
The installation of the magnet mounts in shown on
Part number recommendations for the magnets and screws are provided in
Section 5.2 of the
.
A pole mounting kit can also be used to mount the Asset Tracker. Installation
instructions for the pole mounting kit are provided on
of this document.
An example of the enclosure with the pole mounting kit installed is shown on
A part number recommendation for the pole mount kit is provided in Section 5.4
of the
.
The Asset Tracker ships with 3 pieces of VHB tape installed on the back of the
enclosure.
To use the VHB tape option, simply remove the tape backing and mount the
Asset Tracker by pressing firmly on the enclosure body. If choosing another
mounting method, then the pre-installed VHB tape can easily be removed.
Part number recommendation for the VHB tape are provided in Section 5.3 of
the
.
SOMETHING BROKEN OR MISSING?
CONTACT SWARM CUSTOMER SUPPORT:
SUPPORT
@
SWARM.SPACE
Overview & Setup - Mounting
© 2022 SWARM TECHNOLOGIES
SWARM
ASSET TRACKER
QUICKSTART GUIDE
PAGE
8
