19
EN
18
EN
Changing the viewing angle
• Turn the locking screw to
the left (anti-clockwise) to
unlock the tripod ring in
position.
• With the scope on a
tripod, turn the body of the
scope to the desired vie-
wing position. The ATS will
click into place at: 0˚, ±45˚,
±90˚. The STS will click into
place at: 0˚, ±90˚.
• Turn the locking screw to
the right (clockwise) to lock
the tripod ring in position.
Using the sunshield
The integrated, extendable
sunshield keeps away dis-
turbing lateral light and pro-
tects the objective lens
from rain.
The sunshield is best slid
out and in with a slight rotary motion.
It snaps in when extended as well as when
retracted.
The protective cap for the objective lens can also
be used when the sunshield is extended.
Disassembly of the protective cap
for the eyepiece
The protective cap for the
eyepiece is attached to the
eyepiece with a cord. By
loosening the screw on the
eyepiece with a screw-
driver, you can remove the
cord with the cap from the eyepiece. Please
reinsert the screw.
After using the observation telescope
• Please put the protective cap for the objective
lens back on.
• In order to protect the cover glass in the bayo-
net fitting, leave the eyepiece mounted and pro-
tect it by putting on its protective cap or close the
bayonet fitting with the cover provided for this
purpose.
Maintenance and Care
Lens-cleaning cloth
You can clean high sensitive lens surfaces with
the enclosed special cloth made of micro-fibres.
It is suitable for objective lens, ocular lens and
eye-glasses.
Please keep the cloth clean, as dirt can damage
the lens surface. If the cloth gets dirty, it can be
washed in luke-warm soapy water and air-dried.
Please use it exclusively for cleaning lens sur-
faces!
Summary of Contents for ATS 65
Page 1: ......
