2
Safety guide and conditions for use
4
This machine is intended for laminating paper and paper-like materials, and
was specially designed only for this purpose. Please use the laminator only for
this purpose and in the way that is described in the user manual.
Do not stick or insert any other objects into the openings in this machine be-
sides the materials recommended in this guide.
Attach the power cord so that it is not bent, crimped or twisted. Please also take
care that no damage will occur to the plug or the cord.
Protect the machine from dampness and water! Do not use the machine if the
power cord or plug show signs of damage. If the laminator is not in use or you
would like to clean it, please pull out the power cord beforehand.
Keep this machine out of direct sunlight. Do not place it near a heater or air
conditioning unit (see illustration below). Do not place or set any objects on top
of the machine. Please let the machine cool down before cleaning.
In case of a malfunction, please do not attempt to repair the machine yourself.
If repair is necessary, contact the manufacturer.
For reasons of safety, we recommend unplugging the machine after use.
Please keep this manual with the machine case of reselling or transferring it to
another party.
Install the laminator near to a socket-outlet wich is easy accessible.
Attention:
To avoid risk of electric shock, under no circumstances open the laminator’s
cover (the housing cover). It does not contain any parts that can be repaired by
the user. Repair work may only be performed by qualified professionals.
Never open the housing of the machine or touch any of the parts that are only
meant to be used by technical support staff.
Do not open the machine – this will result in the voiding of any warranty claims.
monolith_pjp-II_manual(GB)-ohneLogo_Tray_neu.indd 4
03.07.2018 06:40:24
