SECTION 4 – (cont.)
Figure 4-8: Front bearing installation. Figure 4-9: Front seal installation.
Figure 4-10: Insert seal until flush with plate. Figure 4-11: Insert the front preload spacer.
4.3 – INSTALLING FRONT BEARING, BEAR-
ING SEAL, PRELOAD SPACER, & LOCKNUT.
Insert BN002759 FRONT BEARING into the front
bearing race. The bearing should slide onto the
shaft by hand. Insert BN000109 FEEDWORKS
SIDE OIL SEAL until flush with the face plate.
Insert CB006867 FRONT PRELOAD SPACER
into the seal. Install BX011562 LOCK WASHER
and tighten BX011559 LOCK NUT hand tight.
Figure 4-12: Hand tighten lock nut.
BN002759
BN000109
CB006867
BX011559
BX011562
