©
2021 SwellPro All Rights Reserved
29
Return to Home (RTH)
Flight Movement
Description
After RTH is initiating, if the aircraft's height
is > 20m and >15m away from the home
point, the aircraft is going to maintain its
height and return home.
If the aircraft height is < 20m and >15m
away from the home point, the aircraft is
going to ascend to 20 m, then return to
home.
If the aircraft's GPS signal is too weak (GPS signal shows 0), the aircraft is not able
to initiate RTH.
During RTH, you can take over the flight by controlling remote controller joysticks.
When there is no input from the remote controller, the aircraft is going to continue the
RTH process.
Keep your eyes on the aircraft during the RTH process, watch out for any obstacles
on the flight path.
Low Battery Auto Return to Home
Low battery auto RTH will initiate when the drone intelligent battery reaches Level 1 low
battery warning.
Level 1 alarm:
The drone battery level has
reached 14.6V. The remote controller
screen will prompt “LOW BATTERY; Return
Aircraft”.
Front drone status indicators will
flash a pattern of 3 red lights. The aircraft
is going to proceed auto payload release,
then proceed to auto return-to-home.
