-08-
/
/
If the standard silicone eyeshade doesn't fit well with your head contour, there is bigger one in
the accessory bag for spare. Please follow below tips to change the eyeshade:
1. Remove the Silicone eyeshade that comes along with standard package.
2. Stick the black PU foam to the frame of big eyeshade, then buckle the whole eyeshade onto
the glasses.
· Video recording icon: In normal state, such icon is white, in video recording, it is red. If you
cannot take a video for any reason, for example, the video module is inactivated, the storage
card is full or the faulty, such icon will be in red, like .
· Photo icon: In video preview state, press the <PHOTO> button to display such icon in red,
indicating one photo has been taken.
· Storage card icon: In normal state, it appears in its original color followed by capacity in GB
(1,000MB), when the storage card is full, it will be in red.
· Mode icon: RF, HDMI, AV IN and PLAYBACK mode.
· mode: You can only have 3D display in RF mode.
· mode: Such icon will appear when 3D mode is off or the device is in HDMI IN, AV IN,
PLAYBACK and Front Camera mode.
· Mode: After this device is connected to PC, such icon will appear. In The mode, you may
manage the contents in the storage card of this device via PC operation, (you may have
Playback, Copy and Delete on PC).
· / Play/Pause icon.
· / Fast Backward/Fast Forward icon: when operating Fast Backward/Fast Forward
operation, you will see such icon followed by corresponding speed rate.
· Power supply icon: If you do not want this device to monitor power voltage, you may set the
power supply in DC IN and then the screen will display a <DC IN> icon. If battery is used for
power supply, you may set the battery pack voltage range in 2S, 3S, 4S, 5S or 6S, and then the
screen will display corresponding battery icon, in detail, stands for Full battery and for Low
battery.
· Channel icon: In 3D mode, the icon “CH” will appear on the screen. If the <Custom> band
setup is activated in 3D mode, then the screen will display at the same time RX1/RX2 band and
channel information, in 2D mode, the screen will display “BAND” and “CH”.
SCREEN OSD
Changing the Eyeshade