background image

 

 

©2022 SwellPro All Rights Reserved    

 46 

  When  using  Boat  mode  on  the  water,  be  careful  of  the 

landing gear and other attached accessories getting caught on 
weed or other debris to prevent the drone from flying. Be aware 
of the weeds and other debris to prevent the landing gear and 
other  attached  accessories  from  getting  caught  by  them, 
which can cause the drone not to be able to move or take off. 
 

 

 There is a Slow mode embedded in all flight modes for a safer flight purpose. (For 

example, when the drone is equipped with SwellPro Gimbal Extension Bar (GEB), 
switching to Slow mode allows the drone to fly more stable and safely.) Press the 
PAYLOAD(Right) / Slow Mode button 3 times to enter Slow mode.

 

Intelligent Follow 

Thanks to the built-in GPS module on the remote controller. The drone can accurately 
track  the  location  of  the  remote  controller.  When  Follow  Me  mode  is  turned  on,  the 
drone  will  accurately  track  and  follow  the  remote  controller's  position,  you  can  still 
adjust the aircraft direction, following distance, camera angle on the remote controller. 

 

 

 
Start  Follow  Me:

  1)  Check  that  the  remote 

controller  has  a  GPS  signal  by  checking  the 
GPS  status  indicator  on  the  screen.(The  GPS 
status icon is not flashing) 2) Press and hold 
the  Follow  Me  button 

  to  start  Follow  Me 

mode. The remote controller will beep twice. 
 

Stop Follow Me:

  Press and hold the "FOLLOW 

ME"  button  again  until  the  remote  controller 
beep once to indicate that Follow Me mode is 
disengaged. 

 

 When  the  remote  controller  or  the  drone  lost  the  GPS  signal,  Follow  Me  mode  will 

automatically be disengaged, and the drone will hover on a fixed position in the air. 

 When the remote controller and the drone lost connection, the remote controller will 

beep and vibrate once, and the drone will initiate the return-to-home process. 
 

 Be aware of the drone's surrounding to prevent the drone from crashing into other 

objects when using Follow Me mode. 

Summary of Contents for SplashDrone 4

































































Reviews: