16 ©2021 Swellpro Technology Co., Limited
The Intelligent battery is quick and easy to change. Ensure the battery is OFF before inserting or removing
it from the drone.
Unlock the waterproof hatch door and open the catch.
Open the battery hatch door.
Slide in the fully charged intelligent battery and fold the battery handle
flat.
Close the battery hatch. Fasten the catch and then lock the hatch.
Always check to ensure that the waterproof seal on the hatch door is
clean and lightly lubricated.
The drone is no longer waterproof when the battery hatch is open. Do not allow water or sand to enter the
drone while the battery hatch is open.
The
Appendix
of this manual contains additional warnings and precautions regarding the batteries,
safety, charging and maintenance. Please ensure you familiarize yourself with all of this information to
get the most from your purchase.
Flight Modes and Featured Functions
The SwellPro SD4 utilizes an all-new, high-performance flight computer. Flying with just the remote
control (without using the NaviFly app) the drone natively supports six different flight modes. The NaviFly
app adds further functionality and allows the pilot to choose the custom mode accessible from the
remote control
’s Flight
Modes switch.
The Native Flight Modes are: GPS mode; ATTI mode; Curise Mode; Circle Mode;
H Mode; Mode
The Featured Functions are: Boat Mode; Intelligent Follow; Controls; Return
Home (RTH)
GPS Mode