34 ©2021 Swellpro Technology Co., Limited
Other accessories can be replaced or installed in the same way.
Installing a mobile phone or tablet
Release the lock behind the mobile device mount, then slide open the mount to accommodate your
device, lock the mount to complete the installation.
Starting and Stopping Motors (Arming the Drone)
Before starting the drone, take the following precautions:
1. Place the aircraft in an open area 3 meters away from yourself or others.
After the aircraft is powered on, the system will conduct a self-test. After the self-test is completed, it will
sound a confirmation tone.
2. In GPS mode, if the satellite signal of the aircraft is poor, the remote control will vibrate when
unlocking, and the display will prompt "GPS signal is poor, unable to unlock". The motors will not unlock.
3. Unlocking in ATTI mode is not affected by GPS signal strength. However, it is not recommended for
novice pilots to fly without GPS coverage.
4. In CUSTOM mode, the motors cannot be unlocked.
Starting (Arming) Motors
Remote control operation
Describe
Pull both the left and right joysticks simultaneously down and
inwards and maintain this position for 3 seconds. The motors will
now be unlocked and will start rotating.
Locking Motors (Emergency Stop)
Remote control operation
Description
Method 1: After the aircraft has landed on the ground or water
surface, pull the throttle to the lowest position and hold for 3
seconds. The motor will lock automatically. (Recommended)
Method 2: Pull both the left and the right joysticks downwards and
outwards. This method can be used to as an emergency stop
Stopping the motors in flight may cause the drone to crash and
should only be carried out in emergencies (for example: there is a
risk that the drone may hit people or crowds) if stopping the motors
will minimize any potential damage.
