©2019 SwellPro All Rights Reserved
18
Camera
APP installation: The SwellCam2 app is available for iOS and Andoid devices. Android systems can download
the APK from either the Android Play Store or our website www.swellpro.com.
To connect the app to the Spry+’s camera, power on the drone, then press the WiFi switch on the underside
of the drone. The switch will begin flashing Red-Green. Connect your mobile device to the SwellPro... WiFi
hotspot, the password is 00000000.
Using the APP: Open the camera APP. The screen will show the camera preview. With the APP, you can set
the parameters for photos and video, you can also control the camera on the ground and take photos or
videos.
Spry+'s built-in camera can capture 4K videos and 12 megapixel still images. With its inbuilt WiFi function
you can also use a mobile app to change settings and download videos and photos. This section introduces
camera parameters and use.
The Spry+ will automatically save longer video files into chapter files of 4GB.
Always stop video recording before powering off the Spry+ or your video will be lost.
Camera Settings
WiFi switch
Description
Illustration
Camera Control
Photo/Video
Long-press the camera button (five beeps) to start or stop video
recording.
Short-press the camera button (two beeps) to take a photo.
You cannot take a photo if video recording is started.
After taking a photo, the camera information window will display a
camera icon and the resolution of the photo. The card icon
indicates the remaining number of photos the microSD card can hold.
In video mode, the card icon indicates the remaining hours and
minutes (hh:mm) the microSD card can hold.
Summary of Contents for Spry+
Page 38: ...User Manual 2019 11 ...