GPS
11.2V
10
0
1
2
Lat
:
113.860667
Ing
:
22.704291
©2019 SwellPro All Rights Reserved
29
Flight Safety
APP control requires a good wireless communication environment. If the drone does not execute the
operation command, this may be due to interference, please try again.
If the drone continually fails to respond to your APP commands, please operate the drone with the
remote controller: quickly switch the Flight Mode switch once, it is suggested to use the GPS mode to
take over control.
3. Flight Path Setting
a.Tap the “Flight Path” button at the top of the screen and tap the map to set the flight path (double tap the
flight point to delete it, tap the “Delete” button to delete all flight paths). Tap the flight point again to edit.
b.After completing the setup, click the “Upload” button and the drone will fly according to the flight path.
1. According to provisions of the International Civil Aviation Organization and many national air traffic
regulations, drones must be operated in specified airspaces. The Spry+ is configured to not exceed an
altitude of 200m and a distance of 800m from the remote controller.
2. During flight, try to maintain line of sight with the drone, keep away from obstacles and people.
3. Many regulations require the pilot to fly a drone within line of sight. Take particular care when flying a
drone out of sight.
Summary of Contents for Spry+
Page 38: ...User Manual 2019 11 ...