10
FB 465
Dok: 101490-GB 0810
The vibrator is started and stopped with the power switch on
the handle.
When the control hoop on the handle is moved backwards,
the machine reverses and when the hoop is moved forwards,
the machine moves forwards. The speed is controlled by
how long the control hoop is activated.
The machine is only designed to be used outdoors. Work
with the machine in daylight or other adequate lighting.
Ballast must be wetted or naturally damp. All other use is
discouraged.
Note! When moving up a slope, the machine should be
reversed.
The machine may not incline more than 20º when in use or
parked.
Handle Heating
For increased comfort, the machine has an electrically hea-
ted handle. The handle heating is activated with the power
switch on the handle and can only be used when the vibrator
is connected, which prevents the heating coil from dischar-
ging the battery when the machine is not being used.
OPERATING INSTRUCTIONS
TRANSPORTATION
The machine is fitted with a lifting hawser that can be folded
in under the hood when it is not in use.
Check before lifting that the lifting eye and its mounting
on the machine are undamaged. Check also that the base
plate’s rubber dampers are undamaged and firmly attached.
For transportation by vehicle, the handle must be folded
forwards and locked with the transport locking device. The
machine must then be secured with, for example, approved
straps. Note! Secure it by the base plate and not the rubber-
cushioned upper part.
