background image

FB 465

Dok: 101490-GB  0810

USE

SWEPAC FB 465

is used to pack ballast under foundations, in connection with road 

building, in trenches, etc. On account of the forward/reverse func-

tion, the machine is very suitable for packing in tight spaces and as 

a complement to larger packing equipment. The infinitely variable 

speed control makes it possible to move with great precision and to 

pack without moving.

CONTENTS

USE  ..........................................................................3

SAFETY INSTRUCTIONS  .....................................4

STANDARDS  ..........................................................4

SIGNS  ......................................................................5

TECNICAL DATA ....................................................6

METHOD OF OPERATION  ...................................6

TECHNICAL DESCRIPTION .................................7

DAILY CHECKS ......................................................8

BEFORE STARTING  ..............................................9

STARTING ...............................................................9

STOPPING  ..............................................................9

OPERATING INSTRUCTIONS  ...........................10

TRANSPORTATION  .............................................10

Summary of Contents for FB 465












Reviews: