background image

FB 465

Dok: 101490-GB  0810

STANDARDS

Noise

Measurement in accordance with the standard EN 500-4 

Rev. 1:1998, Annex C:

In accordance with the conditions in Directive 2000/14/EC, 

Annex VI, the following values are reported:

As the sound pressure level at the operator’s ears exceeds 

85 dB (A), ear protectors must be used during operation!

Hand/arm vibrations

The vibration acceleration was measured in accordance 

with the ISO 5349 standard during operation on a surface 

of macadam. The measurement values were translated 

into the maximum daily exposure time for regular usage. 

For additional information about vibrations, please confer 

the regulation AFS 2005:15 from the Swedish Work 

Environment Authority, effective July 1st 2005.

SAFETY INSTRUCTIONS

  

Before using the machine, the operator must be informed  

  of the manufacturer’s safety instructions and instructions  

  for use.

  

The machine may only be used outdoors.

  

The machine may not be used if protection and safety  

  devices are not present or not working.

  

The operator may not leave the machine unattended when  

  the engine is on. When the vibrator is connected, the  

  operator must be able to control the movement of the  

  machine using the control handle and the start/stop  

  controls. The machine may be operated only by a trained  

  operator.

  

During maintenance work or other interventions in the  

  machine, the engine must always be off.

  

Switch the engine off before adding fuel. Avoid fuel  

  spillage and immediately wipe off any spilled fuel. Add  

  fuel only in well ventilated areas.

  

Avoid touching hot engine parts, for example the silencer.

  

Before lifting the machine, check that the lifting device  

  and its mounting are not damaged and that the rubber  

  dampers on the base plate are undamaged and tightened.

  

During transportation and storage, the fuel tank should be  

  empty and the fuel cock switched off.

  

When the machine is parked, ensure that it cannot tip  

  over. The machine may not incline more than 20º.

  

The operator must use ear protectors when working with  

  the machine.

  

The operator must ensure that no unauthorised persons  

  are in the immediate vicinity of the machine.

Sound pressure 

level at the oper- 

93 dB (A)

ator’s ears, LpA 

Permitted sound 

 

power level, L 

WA 

108 dB (A) 

 

 

Guaranteed sound

power level, L 

WA 

108 dB (A) 

 

 

FB 465 

 

 

Exhaust Emissions

The FB 465 meets the requirements for exhaust emissions in 

accordance with US-EPA stage 2. 

 

 

 

 

FB 465

Hand/arm 

 

vibrations m/s

2,6

The maximum 

daily exposure 

time 

7,4 h

Summary of Contents for FB 465












Reviews: