FB 465
Dok: 101490-GB 0810
FB 465
Net weight .................................465 kg
Base plate, w x l ........................700 x 1080 mm
Speed .........................................approximately 25 m/min
Permitted inclination ................20°
Centrifugal force .......................60,000 N
Vibration frequency ..................70 Hz
Drive engine ..............................Yanmar L 100AE
Engine power ............................7.35 kW
Engine RPM ..............................3600 RPM
Fuel tank volume .......................5.5 liter
Fuel type ....................................Diesel
Hydraulic oil volume ................38 liter
Battery capacity ........................40 Ah
Generator power ........................180 W (15 A)
Oil quantity, crankcase ..............1,65 liter
TECHNICAL DATA
METHOD OF OPERATION
The machine consists of a base plate with a vibration
element and an upper part cushioned from the base plate.
The cushioning between the base plate and the upper part
consists of four rubber dampers. The upper part, on which
the drive engine is mounted, is also designed as a hydraulic
oil tank. The control handle is placed on the upper part and
cushioned with rubber dampers. The vibration element is
driven and the direction of travel is changed by means of hy-
draulics. The hydraulic pump, mounted on the diesel engine,
supplies a hydraulic motor on the vibration element with an
oil flow. The vibration element consist of two shafts on roller
bearings with bias weights that are connected to gear wheels
that rotate in opposite directions. One gear wheel can rotate
on its shaft by means of a hydraulic cylinder. This changes
the mutual phase positions of the eccentric weights and the
direction of travel of the machine, and the speed is changed
infinitely variably. All parts are well protected against da
-
mage in connection with use and transportation by a sturdy
protective frame with a hood of impact-resistant polythene.
FUEL and OIL RECOMMENDATIONS
Fuel ...........................................Diesel
Engine oil ..................................SAE10W-30
Hydraulic oil .............................Viscosity Grade ISO VG 32
