10
TR 600P / TR 750P / TR 950P / TR 1150P
1
2
3
4
5
6
7
8
9
D
ok
: 101502B
-GB 1442
DAILY CHECKS
Fuel Check
Check that there is fuel in the tank. Fill up if necessary.
Engine Oil Level Check
Check the oil level in the crankcase every day. The
oil must reach the edge of the filling hole when the
machine is on a level surface.
Oil/Fuel Leakage
Check every day that the engine is not leaking oil or
fuel. If a leak is discovered, the machine may not be
operated until the fault has been remedied.
Regular Check
The air filter must be checked at least once every
working week. When working in dusty conditions,
check daily.
1. Paper element
2.
Foam plastic element
2
1
1. Remove the foam plastic element and the
paper element and check that they are undamaged.
Replace damaged parts.
2.
Wash the foam plastic element in liquid with a high
flashpoint and let it dry properly. Dip in engine oil
and squeeze dry.
3.
Strike the paper element against a hard object a few
times to loosen any dirt.
V-belt Drive
Replace a damaged V-belt with the new type according
to the table below
Machine type
V-belt type
TR 600P with GX 160 engine
XPA 707
TR 750P with GX 200 engine
XPA 707
TR 950P with GX 200 engine
XPA 707
TR 950P with GX 270 engine
XPA 757
TR 1150P with GX 270 engine
XPA 757
TR 1150P with GX 390 engine
XPA 757
1; Spark plug
2; Engine valves
3; Engine oil/dipstick
4; Carburettor
5; Silencer
6; Fuel filler cap
7; Fuel tank
8; Air filter
9; Recoil starter
