8
TR 600P / TR 750P / TR 950P / TR 1150P
1
2a
3
4
5
6
7
8
9
10
11
12
13
2b
14
D
ok
: 101502B
-GB 1442
DESCRIPTION
TR 600P, TR 750P, TR 950P and TR 1150P are intended to be used for finishing newly cast concrete
surfaces. The concrete surface can be power floated with a floating disc or floating blades and power trowelled
with trowelling blades of steel. The surface achieved will be even, dense and have a high finish.
No other use is permitted.
TR 600P, TR 750P, TR 950P and TR 1150P must only be used in well-ventilated areas, as is the case for all
combustion engine machines.
MAIN PARTS
1; Throttle control
2a; Blade adjustments (screw pitch)
2b; Blade adjustments (quick pitch)
3; Knob for folding (only for long handle)
4; Knob for height adjustment
5; Transport wheel (option)
6; Protection ring
Note!
TR600 are equipt with a turning
protection ring
7; Operating handle
8; Hold-to-run handle (Dead man’s grip)
9; Lifting eye
10; Troweling blade
11; Extra emergency killing switch (in case of
turning handle).
Note!
Not for the TR600P.
12; Rubber O-ring. Protecting walls from marks and
scraps.
13; Handle for manual lifting
14; Killing switch
TR 750P / TR950P / TR1150P
TR 600P
