89
Equipment Details
Lipseal:
Remove the sliding cover. Open the
valve-blade by turning the blade-opener
knob anticlockwise. Clean the seal with
water. Dry the seal and grease with silicone
spray/oil or vegetable oil.
Seal of automatic vent:
Turn the automatic
vent 60° anticlockwise and remove gently.
Clean the seal with water. Dry the seal and
grease with silicone spray/oil or vegetable
oil.
To clean the holding tank, empty the tank,
and rinse with clean water. Use a mild soap
to clean toilet bowl, seat and cover, as well
as exterior of toilet unit and holding tank.
NOTE:
Do not use strong household
detergents or cleaners that contain chlorine,
solvents or acid contents.
WINTERING/STORAGE
The Thetford Cassette C-200 CW/CWE is
easily winterised for storage.
Empty remaining fresh water into the bowl
by activating the flush handle up and down
(C-200 CW) or by pressing the flush button
(C-200 CWE).
Once pump has been cleared and water flow
has stopped completely, release into waste
tank. Remove waste tank and empty
contents in normal way.
To evacuate any remaining water from the
fresh water tank. place a container
underneath the drainplug and remove
drainplug.
When procedure has been completed
replace drainplug and waste holding tank
(fig. 15). Clean the seals and grease them
after drying (see cleaning and maintenance).
Leave the blade of the holding tank open. Do
not replace cap on the pour out spout, to
ventilate the holding tank. (Also grease the
seal of the pour out spout cap.)
COLD WEATHER USE
The toilet can be used in cold weather
conditions provided that the toilet is in
heated surroundings. If this is not the case,
you can use a nontoxic antifreeze (propylene
glycol) or an antifreeze such as those used in
car radiators. Add the antifreeze to the water
in the tank. Add the quantity specified in the
instructions, paying due regard to the safety
instructions.
HIGH ALTITUDE AND WARM
WEATHER USE
Pressure may build up in the holding tank if
the tank is not inserted while driving at high
altitudes or in warm weather conditions. The
automatic holding tank vent will vent the
tank when there is over- or under-pressure.
High temperatures may require additional
Thetford toilet fluid.
THETFORD WARRANTY
1. The Thetford Cassette is warranted for
one year from the date of purchase,
please fill in and return the warranty card.
2. The warranty covers replacement of
defective or flawed parts and the
inadequate performance of the toilet.
3. In case of a defect apply to an original
dealer or Thetford Service Centre with
proof of purchase.
4. Defects, which in our judgement occurred
from misuse, negligence or accident, are
not covered by the warranty. In addition,
the warranty does not apply if the
product is installed or handled improperly
or if other than the prescribed toilet fluids
have been used or if the product has
been altered in any way or has been
repaired by unqualified persons, or if the
serial number and/or date has been
altered or removed.
5. Should the original buyer wish to return to
us parts believed to be defective, the
parts should be sent prepaid. If we find
the parts defective and covered by
warranty, they will be repaired and
returned. If warranty does not apply or
has expired, a nominal charge will be
made. Any transport costs are for the
account of the owner.
6. Before returning product or parts they
should be properly cleaned, in order to
carry out inspection and repair.
7. No other warranty is given and no
personal representative is authorised to
make any warranty other than that is
contained herein.
Summary of Contents for 2005 MH
