Side 67
MV-1292-1293-1294-1073-5-2020 © All rights reserved Swim & Fun Scandinavia ApS
5. Usage and operation
5.1 The display
The heat pump can be turned on or off with the ON/OFF button.
When OFF the display is showing the following information:
•
The indication ‘OFF’ at the location of the pool water temperature
•
The temperature wanted for heating
•
Eventual error messages
When ON the display is showing the following information:
•
The temperature wanted for heating
•
The pool water temperature
•
The indication ‘Heating’ when the unit is heating the water
•
A graphical representation of the water flow: the flow bar (see further)
5.2 Setting of the desired temperature
The desired temperature can directly be set with the arrow keys. The setting will automatically be
stored in memory.
A choice can be made between °C and °F as follows:
1.
Cut electrical power to the unit.
2.
Press both arrow keys at the same time and restore electrical power to the unit, than release
the keys.
