41
PROJECT 512
Fig. 36
(3)
2-1/2'' screws
each side
Fig. 37
Fig. 38
(3)
2-1/2'' screws
(2)
2-1/2'' screws
each side
2''
x 4'' x 45-1/4''
2'' x 4'' x 45-1/4''
2'' x 4'' x 23-1/4''
• BOTTOM OF LADDER RAIL •
Top Corner of 2''
x 4''
Bottom
Corner of 2''
x 4''
2- 3/4''
From Bottom
(6)
1-1/4''
screws
E X A M P L E O F L A D D E R R U N G I N S TA L L AT I O N
STEP
BRACKET
O. Ladder Assembly.
1.
On ladder rails, mark all measurement locations for
each side with a pencil. Draw an angle line
connecting measurements for each ladder rung
alignment.
(Fig. 35)
2.
Align top of step bracket with line and screw in
place. Install a ladder rung at each of the four
locations.
(Fig. 35)
and
(Fig. 36)
Repeat on other
ladder rail.
3.
Attach 2'' x 4'' x 23-1/4'' to siderails using
(2) 2-1/2'' screws per side.
4.
Secure ladder to unit.
(Fig. 37)
and
(Fig. 38)
Note:
The top step should be 11" below the deck
and all steps should be level.
5.
Screw (2) 2-1/2" screws into the ends of each ladder
rung through the left and right side rails.
(Fig. 38)
(2)
2-1/2'' screws
each joint
8''
SIDE OPENING
OPTION 1
2-1/2'' screw
1-1/4'' screws
Summary of Contents for Kodiak PROJECT 512
Page 35: ...35 PROJECT 512 Fig 29...
