Setting up the NYOS RS and first-flying
Section 04
21
C-bridge system
The NYOS RS riser has a specially
designed bridge system which allows
the pilot to make very precise
corrections using the C-risers, giving
better handling in accelerated and
unaccelerated flight.
Various problems can be prevented by
briefly pulling down the rear C-risers.
WARNING
Pull down the rear C-risers only
briefly. Pulling them down too far for
too long could cause a stall.
Fig. 8
Stabilizing by C-bridge
Flight direction can be adjusted without
losing speed or performance by pulling
the front C-risers.
Fig. 9
Adjustment of flightdirection by C-
bridge
Other features
The NYOS RS does not have a trimmer
or any other adjustable, detachable or
variable features in addition to the
speed bar and speed limiter.
Suitable Harnesses
The NYOS RS can only be used with
harnesses of the “GH” or Race.
Tests have shown that the harness,
harness adjustment and the pilot’s
position in the harness have a
noticeable effect on a glider’s flight
behaviour, particularly the height of the
attachment points and their separation
distance. The general rule is that the
lower the attachment point, the more
agile the paraglider.
Using a harness without seat board can
also result in flight behaviour which
differs from the behaviour observed
during flight testing, so too using
reserves in front containers.
Be aware too that the relative braking
distance can also alter with the height
of the attachment point. Please